- ABOUT LANTECH
- PRODUCTS
Hardened Ethernet Connections
- Introducing Flagship OS5 switches
- Introducing Layer3 OS3/OS4 switches
- Introducing vehicle OS2 PRO switches
- EN50155 10G Uplinks Managed Ethernet Switches
- EN50155 2.5G Uplinks Managed Ethernet Switches
- EN50155 Giga Uplinks Managed Ethernet Switches
- EN50155 Unmanaged Ethernet Switches
- EN50155 IEC 61375 Ethernet Switches
- EN50155 Rackmount Ethernet Switches
- Vehicle Switches and Routers (E-Mark / ITxPT)
- Industrial IEC 61850-3 PT Switches
- Industrial Managed Switches
- Industrial 10G Switches
- Industrial 2.5G Switches
- Industrial Rackmount Switches
- Industrial PoE Solutions
- Industrial Unmanaged Switches
- Industrial Converter Series
Hardened Routers
Software / Accessories
Naming Rule
- SOLUTIONS
- LEARNING CENTER
- CASE STUDY
- SUPPORT
- NEWS / EVENTS
- CONTACT US
8 10/100TX + 2 10/100/1000T X-coded EN50155 Ethernet Switch (w/8 PoE at/af) 24VI/24TVI/WVI model input
- EN50155/50121-4 and EN45545-2 Fire & Smoke verification
- E-marking certificate for vehicle application (24VI model)
- Provides M12 connector with IP54 rated protection
- Galvanic PoE isolation; Support IEEE802.3at/af up to @30W PoE output w/8 PoE (-8 model)
- Dual 16.8~137.5VDC (WVI model) or 9~36VDC (24VI model) or 16.8~56VDC (24TVI model) input selection
- Efficient PoE timer when ignition off (-IGN model)
- Inrush current prevention; polarity reverse protection
- ISO16750-2 P5A compliant
- Optional copper bypass in case of power failure (one pair)
- Wide Operating Temperature from -40°C to 75°C
OVERVIEW
Lantech T(P)ES-0208T (IP54) is a 8 10/100TX + 2 10/100/1000T with M12 connector EN50155 (PoE) unmanaged Ethernet switch for IP54 rated protection, which meets the high reliability requirements demanded by industrial rolling stock applications.
Up to @30W PoE+ output with 8 PoE ports (-8 model); Dual 24VI/24TVI/WVI input with max PoE budget; inrush current prevention and polarity reverse protection
The TPES-0208T-8 (IP54) supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port (8 ports in total) for various IP PD devices. The total PoE budget is up to 80W. The redundant power input design prevents inrush current and safeguards against polarity reversal.
PoE galvanic isolation up to 1.5KVDC to provide power input to PoE Ethernet ports insulation prevents cabling and grounding incidents from damaging the Ethernet switch itself.
Efficient PoE timer when ignition off
Efficient PoE configuration when ignition off supports optional PoE feeding OFF timer (1/5/10mins or others default by 60mins) at ignition off mode to prevent car battery drain-out. (- IGN model)
EN50155, EN50121-4, EN45545 verification; High reliability and extended working temperature
The T(P)ES-0208T (IP54) is designed to meet with critical network environment with IP54 enclosure and M12 connectors for protection against dust and water. It has passed harsh environmental testing to comply with Rolling stock EMI and EMC, environmental shock & vibration and fire & smoke test with EN50155/EN50121-4 and EN45545-2 verification.
For a greater flexibility in application, the T(P)ES-0208T (IP54) supports an extended operating temperature range from -40°C to 75°C.
E-marking certificate; ISO 16750-2 compliant
The T(P)GS-0208T is designed to meet a critical network environment with an IP54 enclosure and M12 connectors for protection against dust and water. It has passed harsh environmental testing to comply with Industrial EMI and Safety standards as well as stability testing such as Free fall, Shock, and vibration. It is compliant with ISO 16750-2 P5A which protects the switch from being damaged by high voltage that could be found at vehicle cranky start.
Optional GigaT bypass
The optional bypass relay is set to bypass the switch to the next one when power is off in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. (-BT model)
*Pending **Optional
FEATURES
- 8 10/100TX EN50155 (PoE) Unmanaged Ethernet Switch with M12 connectors and IP54 rated protection
- PoE model: Supports IEEE802.3at/af feeding power up to 30W per PoE port(-8 model)
- Dual power input voltage 9~36VDC for 24VI model and can boost to 54V for PoE 802.3at/af at max 80W budget
- Dual power input voltage 16.8~56VDC for 24TVI model and can boost to 54V for PoE 802.3at/af at max 80W budget
- Dual power input voltage 16.8~137.5VDC for WVI model with PoE budget up to 80W
- Inrush current prevention; polarity reverse protection
- Back-plane (Switching Fabric): 5.6 Gbps
- 16K MAC address table
- Wide Operating Temperature (-40°C ~75°C)
- Din rail** and wall mount design
- Bypass protection** - Bypass failed switch caused by power failure, hanged or link down of switch to protect network (one pair)
- Efficient PoE timer when ignition off
- E-mark certificate for vehicle (24VI model)
- EN50155/50121-4/E-marking and EN45545-2 Fire & Smoke verification
*Pending **Optional
SPECIFICATIONS
Hardware Specifications
IEEE Standard |
IEEE802.3 10BASE-T Ethernet |
Transfer Rate |
14,880pps for Ethernet port |
Mac Address |
16K MAC address table |
Connector |
10/100TX: 8 x ports M12 4-pole D-coded with Auto MDI/MDI-X function |
Network Cable |
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable |
LED |
Per unit: Power 1 (Green), Power 2 (Green), |
PoE pin assignment |
-8 model: |
Power Supply |
WVI: Dual input 16.8V~137.5VDC |
Power Consumption |
10W without PoE load |
Power Budget |
Total 80W @ 24VDC and above |
Operating Humidity |
5% to 95% (Non-condensing) |
Operating Temperature |
-40°C ~ 75°C (-40°F ~ 167°F) |
Storage Temperature |
-40°C ~ 85°C (-40°F ~ 185°F) |
Case Dimension |
Aluminum case, IP54 |
Weight |
700g |
Installation |
Wall Mount Design |
EMC |
FCC Part 15, Subpart B ICES-003 Issue 7, |
Stability Testing |
EN 61373:2010 (Shock and Vibration) |
Verifications & Report |
EN 50155:2021, |
Vehicle Certificate |
E24 marking (UN ECE R10) (24VI model) |
MTBF |
TBC (IEEE 62830 standards) |
Warranty |
5 years |
Bypass** |
One pair bypass module on GT Copper ports (P9 & P10) to pass to next switch in case of power failure |
**Optional |
|
*Pending **Optional
DIMENSION
ORDERING INFORMATION
All model packages include M12 caps and wall mount bracket. All standard models are non-coating, optional coating models are available with –C model name. Optional bypass models are available with –BT model name.
| P/N | Model name | Description |
|---|---|---|
| 8360-579 |
TPES-0208T-8-54-24VI | 8 10/100TX + 2 10/100/1000T M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 9~36VDC dual input w/ PoE & Ethernet galvanic isolation |
| 8360-5796 |
TPES-0208T-8-54-24VI (IGN) | 8 10/100TX + 2 10/100/1000T M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 9~36VDC dual input w/ PoE & Ethernet galvanic isolation; w/ignition |
| 8360-5791 |
TPES-0208T-8-54-24TVI | 8 10/100TX + 2 10/100/1000T M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 16.8~56VDC dual input w/ PoE & Ethernet galvanic isolation |
| 8360-5792 |
TPES-0208T-8-54-WVI | 8 10/100TX + 2 10/100/1000T M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 16.8~137.5VDC dual input w/ PoE & Ethernet galvanic isolation |
| 8360-5793 |
TES-0208T-54-24VI | 8 10/100TX + 2 10/100/1000T M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 9~36VDC dual input w/ Ethernet galvanic isolation |
| 8360-5797 |
TES-0208T-54-24VI (IGN) | 8 10/100TX + 2 10/100/1000T M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 9~36VDC dual input w/ Ethernet galvanic isolation; w/ignition |
| 8360-5794 |
TES-0208T-54-24TVI | 8 10/100TX + 2 10/100/1000T M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 16.8~56VDC dual input w/ Ethernet galvanic isolation |
| 8360-5795 |
TES-0208T-54-WVI | 8 10/100TX + 2 10/100/1000T M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 16.8~137.5VDC dual input w/ Ethernet galvanic isolation |
OPTIONAL ACCESSORIES - Connector
| Model name | Description |
|---|---|
| ECONM12-04A(F)-C-180 | 4 pin M12 (Female) A-coded 180 degree crimp type connector for power supply |
| ECONM12-08X(M)-SPEEDCON | 8 pin M12 (Male) X-coded 180 degree crimp type connector for data, Ethernet CAT6A (10G), shielded, SPEEDCON |
OPTIONAL ACCESSORIES - Cable
| Model name | Description |
|---|---|
| ECONM12-4P(F)1.5M CABLE | 4 pin M12 (Female) A-coded 90 degree cable for power supply, 150cm |
| ECABM12X83MSTP | 8 pin M12 (Male) X-coded 180 degree RJ45 STP cable for data, shielded, 300cm |
