Logo-of-Lantech

T(P)GS-0208T (IP54)

10 10/100/1000T X-coded EN50155 Ethernet Switch (w/8 PoE at/af); 24VI / 24TVI / WVI model input

  • EN50155/50121-4/EN61373 and EN45545-2 Fire & Smoke verification
  • E-marking certificate for vehicle application (24VI model)
  • Provides M12 connector with IP54-rated protection
  • Galvanic PoE isolation; Support IEEE802.3at/af up to 30W per port; PoE budget 80W
  • Dual 16.8~137.5VDC (WVI model) or 9~36VDC (24VI model) or 16.8~56VDC (24TVI model) input selection
  • ISO16750-2 P5A compliant
  • Power-saving PoE configuration when ignition is enabled (IGN model)
  • Inrush current prevention; polarity reverse protection
  • Optional copper bypass in case of power failure (one pair)
  • Wide Operating Temperature from -40°C to 75°C


EN50155 EN45545-2 Fire & Smoke PoE 802.3at/af 30W FCC CE UKCA WEEE RoHS2


Datasheet   Manual

OVERVIEW

Lantech T(P)GS-0208T (IP54) is a 10 10/100/1000T with M12 X-coded connector EN50155 (PoE) unmanaged Ethernet switch for IP54-rated protection, which meets the high-reliability requirements demanded by industrial rolling stock applications.


Up to @30W PoE+ output with 8 PoE ports (-8 model); Dual 24VI/24TVI/WVI input with max PoE budget; inrush current prevention and polarity reverse protection
The TPGS-0208T-8 (IP54) supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port (8 ports in total) for various IP PD devices. The total PoE budget is up to 80W. The redundant power input design prevents inrush current and safeguards against polarity reversal. PoE galvanic isolation up to 1.5KVDC to provide power input to PoE Ethernet ports insulation prevents cabling and grounding incidents from damaging the Ethernet switch itself.


Power-saving PoE configurable (-IGN model)
It supports optional PoE feeding OFF timer (1/5/10mins or others) when vehicle main key is off to prevent car battery drain-out. (-IGN model)


EN50155, EN50121-4, EN45545 verification; High reliability and extended working temperature
The T(P)GS-0208T (IP54) is designed to meet with a critical network environment with IP54 enclosure and M12 connectors for protection against dust and water. It has passed harsh environmental testing to comply with Rolling stock EMI and EMC, environmental shock & vibration and fire & smoke test with EN50155/EN50121-4 and EN45545-2 verification. For greater flexibility in application, the T(P)GS-0208T (IP54) supports an extended operating temperature range from -40°C to 75°C.


E-marking certificate; ISO 16750-2 compliant
The T(P)GS-0208T is designed to meet a critical network environment with an IP54 enclosure and M12 connectors for protection against dust and water. It has passed harsh environmental testing to comply with Industrial EMI and Safety standards as well as stability testing such as Free fall, Shock, and vibration. It is compliant with ISO 16750-2 P5A which protects the switch from being damaged by high voltage that could be found at vehicle cranky start.


Optional GigaT bypass
The optional bypass relay is set to bypass the switch to the next one when power is off in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. (-BT model)


*Pending **Optional

FEATURES

  • 10 10/100/1000T X-coded EN50155 PoE Unmanaged Ethernet Switch with M12 connectors and IP54 rated protection
  • PoE model: Supports IEEE802.3at/af feeding power up to 30W per PoE port(-8 model)
  • Dual power input voltage 9~36VDC for 24VI model and can boost to 54V for PoE 802.3at/af at max 80W budget
  • Dual power input voltage 16.8~56VDC for 24TVI model and can boost to 54V for PoE 802.3at/af at max 80W budget
  • Dual power input voltage 16.8~137.5VDC for WVI model with PoE budget up to 80W
  • Back-plane (Switching Fabric): 20 Gbps
  • 16K MAC address table
  • Wide Operating Temperature (-40°C ~75°C)
  • Inrush current prevention; polarity reverse protection
  • Din rail** and wall mount design
  • Bypass protection** - Bypass failed switch caused by power failure, hanged or link down of switch to protect network (one pair)
  • EN50155/50121-4/E-marking and EN45545-2 Fire & Smoke verification
*Pending **Optional

SPECIFICATIONS

Hardware Specifications

IEEE Standard

IEEE802.3 10BASE-T Ethernet
IEEE802.3u 100BASE-T Ethernet
IEEE802.3ab 1000Base-T
IEEE802.3x Flow Control and Back Pressure
IEEE802.3at/af Power over Ethernet

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet port

Mac Address

16K MAC address table

Connector

10/100/1000T: 10 x ports M12 8-pole X-coded with Auto MDI/MDI-X function
Power connector: 1 x M12, 4-pole A-coded, Male

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)

LED

Per unit: Power 1 (Green), Power 2 (Green),
Ethernet: Link/Activity (Green)
PoE: Active (Green)

PoE pin assignment

M12 port # 1~ # 8 support IEEE 802.3at/af End-point. Per port provides up to 30W

Power Supply

WVI: Dual input 16.8V~137.5VDC
24VI: Dual input 9~36VDC
24TVI: Dual input 16.8~56VDC

Power Consumption

10W without PoE load

Power Budget

Total 80W @ 24VDC and above
Higher PoE budget can be applied upon request. **

Operating Humidity

5% to 95% (Non-condensing)

Operating Temperature

-40°C ~ 75°C (-40°F ~ 167°F)

Storage Temperature

-40°C ~ 85°C (-40°F ~ 185°F)

Case Dimension

Aluminum case, IP54
182mm(W)x179.5mm(H)x76.5mm(D)

Weight

700g

Installation

Wall Mount Design

EMC

FCC Part 15, Subpart B ICES-003 Issue 7,
EN 55035:2017/A11:2020,
EN 55032:2015/A11:2020,
IEC 61000-4-2:2008,
IEC 61000-4-3:2020,
IEC 61000-4-4:2012,
IEC 61000-4-5:2014+AMD1:2017 CSV,
IEC 61000-4-6:2023,
IEC 61000-4-8:2009,
IEC 61000-6-2:2016,
IEC 61000-6-4:2018,
EN IEC 61000-6-2:2019,
EN IEC 61000-6-4:2019,
BS EN 55035:2017+A11:2020,
BS EN 55032:2015+A11:2020

Stability Testing

EN 61373:2010 (Shock and Vibration)

Verifications & Report

EN 50155:2021,
EN 50121-4:2016/A1:2019,
EN 50121-3-2:2016/A1:2019,
EN 45545-1, EN 45545-2 Fire & Smoke verification

Vehicle Certificate

E24 marking (UN ECE R10) (24VI model)

MTBF

725,280 hrs (IEEE 62830 standards)

Warranty

5 years

Bypass**

One pair bypass module on GT Copper ports (P9 & P10) to pass to next switch in case of power failure

**Optional

*Pending **Optional

DIMENSION

ORDERING INFORMATION

All model packages include M12 caps and wall mount brackets. All standard models are non-coating, optional coating models are available with –C model name. Optional bypass models are available with –BT model name

P/N Model name Description
8360-580
 TPGS-0208T-8-54-24VI 10 10/100/1000T X-coded M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 9~36VDC dual input w/ PoE & Ethernet galvanic isolation
8360-5801
 TPGS-0208T-8-54-24VI (IGN) 10 10/100/1000T X-coded M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 9~36VDC dual input w/ PoE & Ethernet galvanic isolation; w/ignition
8360-5802
 TPGS-0208T-8-54-24TVI 10 10/100/1000T X-coded M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 16.8~56VDC dual input w/ PoE & Ethernet galvanic isolation
8360-5804
 TPGS-0208T-8-54-WVI 10 10/100/1000T X-coded M12 IP54 rated EN50155 Unmanaged Ethernet Switch w/8 PoE at/af; -40°C to 75°C; 16.8~137.5VDC dual input w/ PoE & Ethernet galvanic isolation
8360-5806
 TGS-0208T-54-24VI 10 10/100/1000T X-coded M12 IP54 rated EN50155 Unmanaged Ethernet Switch; -40°C to 75°C; 9~36VDC dual input w/ Ethernet galvanic isolation
8360-5809
 TGS-0208T-54-24VI (IGN) 10 10/100/1000T X-coded M12 IP54 rated EN50155 Unmanaged Ethernet Switch; -40°C to 75°C; 9~36VDC dual input w/ Ethernet galvanic isolation; w/ignition
8360-5807
 TGS-0208T-54-24TVI 10 10/100/1000T X-coded M12 IP54 rated EN50155 Unmanaged Ethernet Switch; -40°C to 75°C; 16.8~56VDC dual input w/ Ethernet galvanic isolation
8360-5808
 TGS-0208T-54-WVI 10 10/100/1000T X-coded M12 IP54 rated EN50155 Unmanaged Ethernet Switch; -40°C to 75°C; 16.8~137.5VDC dual input w/ Ethernet galvanic isolation


OPTIONAL ACCESSORIES - Connector

Model name Description
ECONM12-04A(F)-C-180 4 pin M12 (Female) A-coded 180 degree crimp type connector for power supply
ECONM12-08X(M)-SPEEDCON 8 pin M12 (Male) X-coded 180 degree crimp type connector for data, Ethernet CAT6A (10G), shielded, SPEEDCON


OPTIONAL ACCESSORIES - Cable

Model name Description
ECONM12-4P(F)1.5M CABLE 4 pin M12 (Female) A-coded 90 degree cable for power supply, 150cm
ECABM12X83MSTP 8 pin M12 (Male) X-coded 180 degree RJ45 STP cable for data, shielded, 300cm

About Lantech

IRIS-ISO-and-ITxPT-LOGO
Lantech is an IRIS / IEC62443-4-1 certified company as well as a member of ITxPT. Lantech designs and produces a complete family of industrial networking products. For decades, Lantech has provided professional and powerful industrial networking solutions globally. Learn More

Taiwan Quality

Lantech-provides-Taiwan-quality-products-and-proudly-provide-5-years-warranty-to-our-industrial-products Lantech is dedicated to providing the best quality and service to our customers. We proudly provide 5 years warranty to our industrial products. Learn More

Contact Us

7F, No.33, Sec.1, Tiding Blvd.,
Neihu District, Taipei, Taiwan, 114066 (or 11494)
Phone: +886-2-2790-2589 │ Fax: +886-2-2790-2516
Sales/Support Inquiry Form

2020 © Lantech Communications Global, Inc. ALL Rights Reserved. Privacy Policy | Terms of Service

Logo-of-Lantech