OVERVIEW

Lantech’s next generation industrial / EN50155 multi-function VPN router supports advanced function of VPN, Load-Balancing, EMMC Flash Storage**, Protocol gateway (Modbus), Storage**, Wi-Fi roaming and LTE quad SIM fail-over for industrial applications.

Load Balancing with 5 mechanisms for multi-WANs
The router supports Load Balancing for LTE/WAN connections. There are five schemes for Load Balancing function:

Serial ports connection with Modbus gateway
For the router that builds in serial ports connection, the built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.

VPN and firewall
Besides traditional VPN peer to peer tunneling, the router supports latest Multi-Site VPN function that is an efficient way for Mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE, IPGRE, and NAT for various VPN applications. The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP / UDP port number.

Support routing protocol: Static route / RIPv2 / OSPF / BGP / EIGRP
Lantech router series supports two routing methods: static routing and dynamic routing. Dynamic routing makes use of RIPv2, OSPF, EIGRP and BGP. The user can either choose one routing method to establish the routing table.

Remote Web control
When the router is at remote area with limited access, Web control can help to get router status or remotely reboot.

Environmental monitoring for inside router info& alerting; Graphic WIFI & LTE signal strength
The built-in environmental monitoring can detect router ambient temperature, voltage, current and total PoE load where can send the SNMP traps Syslog and email when abnormal. The graphic WIFI & LTE signal strength shows connection status at a glance.

Built-in managed switch function
Managed switch function is built-in and provides various L2+ functions for network aggregation deployment. It delivers ports and PoE management, VLAN, QoS, multicast, redundant ring, and security functions.

USB port for back up, restore configuration and upgrade firmware; Dual image firmware
The built-in USB port can upload/download the firmware through USB dongle for router replacement. It support dual-image firmware to choose which one to start.

Editable login page of captive portal
The router supports editable captive portal function that allows administrator to force end-users redirect to authentication page.

Optional EMMC flash storage**
The optional EMMC flash storage on the router can offer 8G/16G/32G capacity.

Support AP/Bridge/Client mode, Mesh roaming (Wi-Fi-supported models)
The router supports AP/Bridge/Client mode for different applications. It also supports client-base roaming to swap between the APs in a network.

Built-in wireless Mesh network (WMN) (Wi-Fi-supported models)
The router supports Mesh network composed of different nodes. The set of SSIDs allow the wireless client to roam freely without the need for complicated account management. With Mesh protocol, it can provide a reliable, scalable, stable and seamless network topology.

IEEE 802.11ac dual band radio up to 2.6Gbps bandwidth (Wi-Fi-supported models)
With IEEE 802.11ac capability, the router can operate either 5GHz or 2.4GHz bands, offering the maximum speed of 2.6Gbps bandwidth (1.3Gbps per 1AC). It is also compatible with 802.11b/g/n that can work with 2.4GHz for longer range transmission. The Wi-Fi 11ac supports AP/ Bridge/ AP Client modes can be diverse for most of wireless application. Working with load-Balancing “Priority” mode, the AP client can enable router to transmit on Wi-Fi with first priority.

Wireless WMM QoS (Wi-Fi-supported models)
The router supports 802.11e standard which defines a set of Quality of Service for wireless LAN applications as well as WMM (WIFI multimedia).

Advanced security & 16 SSIDs (Wi-Fi-supported models)
The security support standards including 64/128bits WEP, WPA/WPA2 PSK (TKIP, AES), 802.1x ensures the best security and active defense against security treads. The router supports up to 16 SSIDs, each SSID has its independent security and encryption.

Optional eSIM** (LTE-supported models)
By replacing physical SIM, optional eSIM chip will allow users to purchase data plans at low prices from local carriers in the world.